A LITTLE YARN. A LITTLE PATIENCE. SOMETHING LOVELY.
cozy pattern laneCROCHET · QUILTING · SLOW MAKING
Quilting workshop

Friendship star quilt block: a 9-inch step-by-step tutorial

🖨️ Prefer to sew from paper? Printable PDF patterns are in our Etsy shop ↗

Make a classic 9-inch friendship star from nine pieces: the ⅞-inch trick for the star points, an easy layout check and row-by-row sewing.

Complete guide · No signup required

9 in finished · 9½ in unfinished
Friendship star · nine pieces. A 9-inch finished friendship star: four star-point HSTs, one center square and four background corners.
9 min read · Reviewed November 16, 2026 · Measurements in inches · Cozy Pattern Lane editorial guide

A first star block for any quilter

The friendship star is a nine-patch: three rows of three squares. Four of those squares are half-square triangles that become the star points, one is the center, and four are plain background corners. It is one of the friendliest first star blocks because every piece is a square before it is sewn.

Traditionally the block was made in groups and shared, which is how it earned its name. Made in red and white, it also makes a cheerful Christmas pillow or table runner.

What you need

One block finishes at 9 × 9 inches inside a quilt and measures 9½ × 9½ inches before it is sewn to anything else.

  • Star fabric (red in our drawings): two 3⅞-inch squares and one 3½-inch square
  • Background fabric: two 3⅞-inch squares and four 3½-inch squares
  • A fabric marker, rotary cutter, mat and ruler with a 45-degree line
  • Thread, pins, iron and a sewing machine set for a ¼-inch seam
What you need
PieceCutBecomes
Star points2 star + 2 background, 3⅞ in4 HSTs trimmed to 3½ in
Center1 star, 3½ inCenter of the star
Corners4 background, 3½ inBlock corners

Step 1: Cut the pieces

3⅞ in · 2 red + 2 background3½ in · 4 background + 1 red center
Cut list at a glance. For one block: two red and two background 3⅞-inch squares for the points, plus five 3½-inch squares (four background corners and one red center).

Cut all nine pieces before you sew, and keep them in two small stacks: 3⅞-inch squares for the points, 3½-inch squares for the center and corners. Mixing the two sizes is the most common mistake in this block, because they look almost the same.

Step 2: Make four star points

× 2 pairs4 HSTs · 3½ insewcut
Make four star points. Pair each red square with a background square. Mark, sew ¼ inch on both sides, cut, press. Two pairs give four HSTs; square each one to 3½ inches.

Draw a diagonal on the wrong side of each 3⅞-inch background square. Place each one on a star square, right sides together.

  1. Sew ¼ inch on both sides of the drawn line.
  2. Cut on the line to get two units from each pair.
  3. Press the seams toward the star fabric.
  4. Square each unit to 3½ × 3½ inches, keeping the seam exactly corner to corner.

Step 3: Lay out the block

each point touches the center and turns the same way
Lay out three rows of three. Corners are background, the center is red, and each point turns so its red triangle touches the center square. Check the layout before sewing.

Put the star center in the middle and a background square in each corner. Place one star point on each side. Turn each one so one short side of its star triangle runs along the center square and its tip points out toward a corner. Then check that all four tips turn around the center in the same direction, like a pinwheel.

Take a phone photo of the layout. It is the easiest way to put pieces back in the right place after each seam.

Step 4: Sew three rows

9½ inpress row 1 → row 2 ← row 3 →
Sew rows, then join them. Join each row of three, press row seams in alternating directions, then nest and sew the rows together. Measure: the block should be 9½ inches.

Sew the three squares of each row together with ¼-inch seams. Press row 1 and row 3 toward the right and row 2 toward the left, so the seams will lock when the rows meet.

Each row should measure 9½ × 3½ inches. If it is shorter, check the seam allowance before going on.

Step 5: Join the rows and check the size

Place row 1 on row 2, right sides together, nest the seams and pin at each seam. Sew, then add row 3 the same way. Press the two long seams toward the center row or open.

Measure the block: it should be 9½ × 9½ inches. Once it is sewn into a quilt or a pillow front, the visible star measures 9 inches.

Fixing common problems

Star blocks show small errors at the points, so check these first.

  • Cut-off star points: the seam that joins the rows was wider than ¼ inch. Sew with the point side up so you can see where the seams cross.
  • Points spinning in different directions: one HST was turned the wrong way in the layout. Compare with your photo before sewing.
  • Block smaller than 9½ inches: usually the HSTs were trimmed under 3½ inches or the seams were wide. Measure each row before joining.
  • Seams not locking: the rows were pressed in the same direction. Re-press one row the opposite way.

Ideas for your stars

One block with a border becomes a pillow front. Three blocks in a row, with sashing between them, make a simple table runner. For a scrappy quilt, use a different star fabric in every block and keep one background color to tie them together.

Final thoughts

The friendship star is proof that a beautiful block can come from very little: nine squares and one clever measurement. Keep your two sizes separate, check the layout with a photo and nest your seams, and your star will finish square. Look for the short video version on Cozy Pattern Lane's Facebook and Instagram (@cozypatternlane).

← Back to free tutorials