A LITTLE YARN. A LITTLE PATIENCE. SOMETHING LOVELY.
cozy pattern laneCROCHET · QUILTING · SLOW MAKING
Quilting workshop

No-waste flying geese: make four at a time, step by step

🖨️ Prefer to sew from paper? Printable PDF patterns are in our Etsy shop ↗

The four-at-a-time method for flying geese: one large square, four small squares, two rounds of sewing and an easy trim. Includes a size chart and tips for sharp points.

Complete guide · No signup required

4 geese from 1 large + 4 small squares
Four flying geese. Press each unit open toward the small triangle. Two hearts give four geese. Each one should measure a little over 3½ × 6½ inches before trimming.
12 min read · Reviewed November 16, 2026 · Measurements in inches · Cozy Pattern Lane editorial guide

Why quilters love this method

A flying goose is a rectangle twice as wide as it is tall, with a big triangle (the goose) in the middle and a small triangle (the sky) on each side. Lined up in a row, the geese seem to fly across the quilt, which is how the unit got its name. You will find them in star blocks, borders, table runners and many traditional quilts.

There are several ways to make them. The stitch-and-flip method, which we explain in another lesson, is simple but throws away a little fabric with every goose. The method on this page makes four geese at once from five squares, with almost no waste and no bias edges to stretch while sewing. Once you have tried it, it is hard to go back.

Words used in this tutorial

A few terms appear below. Come back to this list whenever you need it.

  • Goose: the large center triangle, usually the darker or busier fabric.
  • Sky: the two small triangles beside the goose, usually the background fabric.
  • Finished size: the size you see once the unit is sewn into the quilt. A goose that finishes 3 × 6 inches is trimmed to 3½ × 6½ inches.
  • Seam allowance: always ¼ inch in quilting.

The two magic numbers

This method uses one simple rule. The large square is the finished width of the goose plus 1¼ inches. The four small squares are the finished height of the goose plus ⅞ inch. In this lesson we make geese that finish 3 × 6 inches, so the large square is 7¼ inches and the small squares are 3⅞ inches.

Some quilters like a little extra room for trimming and add 1½ inches to the large square and 1 inch to the small squares instead. Either way works; with the larger sizes you simply trim a bit more at the end.

The two magic numbers
Finished gooseLarge square (1)Small squares (4)Trim to
2 × 4 in5¼ in2⅞ in2½ × 4½ in
3 × 6 in7¼ in3⅞ in3½ × 6½ in
4 × 8 in9¼ in4⅞ in4½ × 8½ in

What you need

For four geese that finish 3 × 6 inches:

  • Goose fabric: one 7¼-inch square
  • Background (sky) fabric: four 3⅞-inch squares
  • A fabric pencil that shows on the background, a ruler with a 45-degree line, rotary cutter and mat
  • Thread, pins, iron and sewing machine set for a ¼-inch seam

Step 1: Cut the squares

goose fabric 7¼ in4 background · 3⅞ in
One large square and four small squares. For four geese that finish 3 × 6 inches: one 7¼-inch square of goose fabric (finished width + 1¼ in) and four 3⅞-inch squares of background (finished height + ⅞ in).

Cut one 7¼-inch square from the goose fabric and four 3⅞-inch squares from the background. On the wrong side of each small square, draw one line from corner to corner. A sharp pencil line is easier to follow than a thick marker line.

Step 2: Round 1 — two small squares on the large square

sewcut
Two small squares on opposite corners. Place two small squares on opposite corners of the large square, right sides together. They overlap a little in the middle. Draw one line corner to corner through both, then sew ¼ inch on each side of it.

Lay the large square right side up. Place two small squares on opposite corners, right sides down, with their drawn lines running in one straight line from corner to corner of the large square. The small squares overlap a little in the middle; that is correct. Pin them in place.

  1. Sew ¼ inch from the drawn line on one side, all the way across.
  2. Sew ¼ inch from the line on the other side.
  3. Cut on the drawn line. You now have two pieces.

Step 3: Press into two hearts

2 heart unitspress toward the small triangles
Cut, press: two heart shapes. Cut on the drawn line. Press the small triangles open, away from the large one. Each piece now looks like a little heart: one large triangle with a small triangle at each end of its long side.

Press each seam toward the small triangles so they open out. Each piece now looks like a little heart: one large triangle of goose fabric with a small background triangle at each end of its long side. Handle the hearts gently while pressing, as the edges are now on the bias.

Step 4: Round 2 — one more small square on each heart

sew bothsides, cut
One more small square on each heart. Place a small square on the corner of the large triangle, right sides together, so its point reaches the middle between the two small triangles. Draw a line from corner to corner, sew ¼ inch on both sides, and cut on the line.

Place one of the remaining small squares on the corner of the large triangle, right sides together. Its drawn line should run from the corner of the heart up to the point between the two small triangles. Pin it.

  1. Sew ¼ inch on both sides of the drawn line.
  2. Cut on the line.
  3. Repeat with the second heart and the last small square.

Step 5: Press four geese

4 geese from 1 large + 4 small squares
Four flying geese. Press each unit open toward the small triangle. Two hearts give four geese. Each one should measure a little over 3½ × 6½ inches before trimming.

Press each new seam toward the small triangle. Each of the four pieces is now a flying goose. They will be a little bigger than 3½ × 6½ inches; that is what the final trim is for.

Step 6: Trim to 3½ × 6½ inches

tip ¼ in below the top3½ × 6½ in unfinished · 3 × 6 in finished
Trim to 3½ × 6½ inches. Line the ruler’s 45-degree line up with one goose seam and keep the goose tip ¼ inch below the top edge, centered at 3¼ inches. Trim, turn and trim again to 3½ × 6½ inches.

Sharp goose points come from careful trimming. The tip of the goose should end exactly ¼ inch below the top edge, so the next seam passes just above it.

  1. Place the ruler so the 45-degree line runs along one side of the goose and the 3¼-inch line passes through the tip.
  2. Check that the tip sits ¼ inch below the top of your trimming area. Trim the top and the right side.
  3. Turn the goose around, line up the trimmed edges with the 3½- and 6½-inch lines of the ruler, and trim the other two sides.

Ideas for using your geese

Twelve geese sewn tip to tail make a 6½ × 36½-inch column, a lovely start for a table runner or a quilt border. Two geese sewn with their bases together make a diamond shape. Eight geese around a center square are the start of many star blocks.

Because this method makes four identical geese at a time, it is easy to plan: divide the number of geese you need by four to know how many large squares to cut.

Fixing common problems

These are the questions we hear most often about this method.

  • Geese too small to trim: the seams were wider than ¼ inch, or the squares were cut short. Try the larger sizes (add 1½ and 1 inch).
  • Tip cut off when sewn into the quilt: the tip was closer than ¼ inch to the edge. Keep that ¼ inch when trimming.
  • Small square in the wrong place in round 2: its point must reach the middle between the two small triangles.
  • Wavy edges: the hearts stretched while pressing. Press gently, lifting the iron.

Final thoughts

Five squares, two rounds of sewing and a careful trim: that is all it takes to make four perfect geese. Make one test set first, measure it, and then cut for your whole project. Follow Cozy Pattern Lane on Facebook and Instagram (@cozypatternlane) for more quilting tips.

← Back to free tutorials