Ohio star quilt block: a 9-inch step-by-step tutorial
🖨️ Prefer to sew from paper? Printable PDF patterns are in our Etsy shop ↗
Make the classic Ohio star from two fabrics: four hourglass units for the star points, a center square and four corners. Cutting list, diagrams for every step and tips for sharp points.
Complete guide · No signup required
A star with a long history
The Ohio star is one of the best-known traditional quilt blocks. Like the friendship star, it is a nine-patch: three rows of three squares. The difference is in the star points. Instead of half-square triangles, the Ohio star uses hourglass units (quarter-square triangles), which give it eight crisp points and a wonderfully balanced look.
If you have already made our hourglass blocks, you know almost everything you need. If not, do not worry: every step is explained below, with a drawing for each one. Make one block as a pillow front or a mug rug, or many blocks for a whole quilt.
Words used in this tutorial
A few terms appear below. Come back to this list whenever you need it.
- HST (half-square triangle): a square made of two triangles.
- Hourglass or QST (quarter-square triangle): a square made of four triangles meeting in the center.
- Nesting seams: pressing seams in opposite directions so they lock together.
- Unfinished size: the size before the block is sewn into the quilt (9½ inches); finished size is what you see afterwards (9 inches).
What you need for one block
One block finishes at 9 × 9 inches. You need a star fabric (navy in our drawings) and a background fabric (cream) with good contrast between them.
| Piece | Fabric | Cut |
|---|---|---|
| Star points | Star | 2 squares, 4½ in |
| Star points | Background | 2 squares, 4½ in |
| Center | Star | 1 square, 3½ in |
| Corners | Background | 4 squares, 3½ in |
Step 1: Cut the pieces
Cut all nine pieces before sewing and keep the two sizes in separate stacks. The 4½-inch squares become the star points; the 3½-inch squares are the center and the corners.
Step 2: Round 1 — make four half-square triangles
Draw a diagonal line on the wrong side of each background 4½-inch square. Place each one on a star square, right sides together.
- Sew ¼ inch on both sides of the drawn line.
- Cut on the line. Each pair gives two HSTs, so two pairs give four.
- Press the seams toward the star fabric.
- Do not trim them; the extra fabric is needed in the next round.
Step 3: Round 2 — turn the HSTs into hourglasses
Place two HSTs right sides together, turned so the star fabric of one lies on the background of the other. Because both seams were pressed toward the star, they face opposite directions and lock in the middle. Pin beside the seam.
Draw a diagonal line from corner to corner that crosses the seam. Sew ¼ inch on both sides of it and cut on the line. Repeat with the other two HSTs. You now have four hourglass units, each with two star triangles opposite each other.
Step 4: Trim the hourglasses to 3½ inches
Press the hourglasses, then trim each one to 3½ × 3½ inches. Place the ruler so the 1¾-inch lines cross exactly at the center point and the 45-degree line runs along a seam. Trim two sides, turn the unit and trim the other two.
Trimming from the center keeps all four triangles the same size, which is what makes the star points meet neatly later.
Step 5: Lay out the block
Put the star center in the middle and a background square in each corner. Place an hourglass on each side. Turn each hourglass so that its two star triangles touch the corner squares. In the top and bottom rows the star triangles sit on the left and right of the unit; in the middle row they sit on the top and bottom.
Step back and look: you should see eight star points around the center. If a point is missing, one hourglass is turned the wrong way. Take a photo of the correct layout.
Step 6: Sew the rows and join them
Sew the three pieces of each row together with ¼-inch seams. Press the seams in the top and bottom rows toward the corner squares and in the middle row toward the center square. The seams will then face opposite directions where the rows meet.
Join the rows, nesting the seams and pinning at each one. Press the long seams open or toward the middle row. Measure: the block should be 9½ inches square.
Ideas for your Ohio stars
One block with a 2-inch border makes a 13-inch pillow front. Nine blocks in three rows of three, with 2-inch sashing between them, make a lovely table topper. For a scrappy quilt, use a different star fabric in every block and keep the background the same.
You can also use three fabrics: a second color for the center square makes the star look like a flower. The cutting stays the same.
Fixing common problems
Here is what to check if your star does not look quite right.
- Hourglass too small to trim: the seams were wider than ¼ inch. Cut 4½-inch squares rather than 4¼.
- Star points cut off: the seam joining the rows was wider than ¼ inch. Sew with the hourglass on top so you can see where the triangles meet and stitch just above that point.
- Missing star points: an hourglass is turned the wrong way. The star triangles must touch the corner squares.
- Block not square: press gently, lifting the iron, and measure each row before joining.
Final thoughts
The Ohio star looks impressive, but it is simply two rounds of the same easy triangle method plus a nine-patch layout. Trim your hourglasses from the center, check the layout with a photo and nest your seams, and your star will shine. Follow Cozy Pattern Lane on Facebook and Instagram (@cozypatternlane) for more quilting tips.