A LITTLE YARN. A LITTLE PATIENCE. SOMETHING LOVELY.
cozy pattern laneCROCHET · QUILTING · SLOW MAKING
Quilting workshop

Pinwheel quilt block and an easy 32 × 40-inch baby quilt

🖨️ Prefer to sew from paper? Printable PDF patterns are in our Etsy shop ↗

Four half-square triangles turned around a center make a cheerful pinwheel. Learn the ⅞-inch rule, the turning trick and how to get a flat, sharp center, then make a baby or wall quilt.

Complete guide · No signup required

Turn the HSTs into a pinwheel. Lay the four HSTs in two rows of two and turn each one a quarter turn from its neighbor, so the dark triangles chase each other around the center like the blades of a toy pinwheel.
11 min read · Reviewed November 16, 2026 · Measurements in inches · Cozy Pattern Lane editorial guide

A block that seems to spin

Remember the paper pinwheels children used to hold up to the wind? This block captures the same happy movement with just four half-square triangles. Each one is turned a quarter turn from its neighbor, and suddenly the dark triangles seem to chase each other around the center.

Pinwheels are perfect for baby quilts, kitchen table toppers and charity quilts. They are quick to make, they use small pieces of fabric, and they look cheerful in any colors.

Words used in this tutorial

Here are the terms you will meet. Come back to this list whenever you need it.

  • HST (half-square triangle): a square made of two triangles, one light and one dark.
  • Nesting seams: pressing seams in opposite directions so they lock together.
  • Pressing open: pressing the two sides of a seam allowance apart, to reduce bulk.
  • Seam allowance: always ¼ inch in quilting. All cutting sizes here already include it.
  • Unfinished and finished size: the block measures ½ inch more before it is sewn into the quilt than the size you see afterwards.

What you need for one block

One block finishes at 8 × 8 inches (8½ inches before it is sewn into the quilt). It is made of four HSTs that finish at 4 inches.

What you need for one block
PieceFabricCut
HST squaresDark2 squares, 4⅞ in
HST squaresLight2 squares, 4⅞ in

Step 1: Cut four squares

2 dark · 4⅞ in2 light · 4⅞ in
Four squares make one pinwheel. Two dark and two light squares, each 4⅞ inches. That is the finished half-square-triangle size (4 inches) plus ⅞ inch.

Cut two dark and two light squares at 4⅞ inches. Choose fabrics with clear contrast; the pinwheel only shows if the darks and lights are easy to tell apart.

Step 2: Make four half-square triangles

× 2 pairs4 HSTs · 4½ insewcut
Make four half-square triangles. Pair each dark square with a light one. Draw a diagonal on the light square, sew ¼ inch on both sides, cut on the line and press toward the dark. Trim each HST to 4½ inches.

Draw a diagonal line on the wrong side of each light square. Place each light square on a dark square, right sides together.

  1. Sew ¼ inch on both sides of the drawn line.
  2. Cut on the line. Each pair gives two HSTs.
  3. Press the seams toward the dark fabric.
  4. Square each HST to 4½ inches, with the seam running exactly corner to corner.

Step 3: Turn them into a pinwheel

Turn the HSTs into a pinwheel. Lay the four HSTs in two rows of two and turn each one a quarter turn from its neighbor, so the dark triangles chase each other around the center like the blades of a toy pinwheel.

Lay the four HSTs in two rows of two. Turn the top-right one a quarter turn from the top-left, the bottom-right another quarter turn, and the bottom-left another. The dark triangles should all point around the center in the same direction.

This is the step where mistakes happen, so take your time and check the layout before sewing. A phone photo is a great memory aid.

Step 4: Sew the pairs and the center seam

8½ in
Sew pairs, then the center seam. Sew the top two HSTs together and the bottom two together. Press these seams in opposite directions, nest them at the center, pin and sew the middle seam. Press it open. The block measures 8½ inches.

Sew the two top HSTs together and the two bottom HSTs together. Press the top seam to the right and the bottom seam to the left, so they face opposite directions.

Place the two halves right sides together. The seams nest at the center; pin right through the center point. Sew the middle seam, going slowly across the center. Press this last seam open for a flat center. The block measures 8½ inches square.

Step 5: Make a baby quilt

4 × 5 blocks · 32 × 40 in finished
A pinwheel baby quilt. Twenty blocks, four across and five down, make a 32 × 40-inch baby or wall quilt. Use one light background and many different darks for a scrappy look.

Twenty blocks, four across and five down, make a 32 × 40-inch quilt, a good size for a baby, a wheelchair lap quilt or a wall. Sew the blocks into rows, pressing the seams of each row in the opposite direction from the row above, then join the rows.

  • Light background: ¾ yard (five 4⅞-inch strips give forty squares)
  • Darks: ¾ yard in total, or scraps for forty 4⅞-inch squares
  • Binding: ⅜ yard (five 2½-inch strips; you need about 156 inches for the 144-inch edge plus joins)
  • Backing: 1½ yards (needs at least 40 usable inches of width); batting about 40 × 48 inches

Fixing common problems

Most pinwheel troubles happen at the center.

  • Center points do not meet: the pair seams were not nested. Re-press one pair the other way and pin through the center.
  • Bulky center: press the final seam open, or gently twist the center so the seams spin in a little circle.
  • One blade going the wrong way: an HST is turned incorrectly. Check against your photo.
  • Block smaller than 8½ inches: the HSTs were trimmed too small or the seams were wide.

Final thoughts

The pinwheel is a happy little block that teaches two important skills: accurate half-square triangles and a neat center. Make one, check it, and then enjoy a whole quilt full of spinning color. Follow Cozy Pattern Lane on Facebook and Instagram (@cozypatternlane) for more quilting tips.

← Back to free tutorials