Northern Lights Star Runner
🖨️ Prefer to sew from paper? Printable PDF patterns are in our Etsy shop ↗
Piece three eight-point stars in blue, turquoise and violet, with four-patch centers, a narrow ice-blue frame and a deep navy ground.
- Raw pieced top
- 42½ × 16½ in
- Skill / units
- Confident beginner · inches
- Piecing seam
- ¼ inch, included in cut sizes
Read everything here without registering. Checkboxes keep progress only while this page remains open.

Complete written pattern · counts checked on paper. Adapted from our existing illustrated project edition and checked for written counts and assembly consistency. Fabric use, finished fit and behavior still need a physical sample. Raw-top measurements are not promises of the bound or washed size.
Fabric and tools
Amounts are planning allowances, not measured consumption from a sewn sample. Check usable fabric dimensions after preparation. For a quilting service or frame that needs more backing margin, increase the backing and batting before cutting.
| Fabric / purpose | Planning allowance |
|---|---|
| A navy | ¾ yd |
| B blue and C turquoise | 1 fat quarter each |
| D violet, including binding | ½ yd |
| E ice blue | ¼ yd |
| F mint and G pale lilac | One 4 × 8-in scrap each |
| Backing | 1½ yd; cut 22 × 48 in |
| Batting | 22 × 48 in |
- Sewing machine, coordinating thread and a ¼-inch foot or seam guide
- Rotary cutter, cutting mat, inch-marked quilting ruler and fabric marker
- Iron, pins or clips, basting supplies, quilting foot if available and a hand-sewing needle
Complete cutting list
All sizes below include seam allowance. Dimensions are width × height unless a specific step identifies fabric length or width of fabric (WOF). Do not add a second allowance. Mark each pile before sewing.
| Piece / fabric | Quantity | Cut size |
|---|---|---|
| B, C and D | 10 squares from EACH color | 3½ × 3½ in |
| E, F and G | 2 squares from EACH pale color | 3½ × 3½ in |
| A navy corners | 12 squares | 3½ × 3½ in |
| A navy geese bases | 12 rectangles | 6½ × 3½ in |
| A navy spacers | 2 strips | 1½ × 12½ in |
| A navy outer long borders | 2 strips | 39½ × 2 in |
| A navy outer end borders | 2 strips | 2 × 16½ in |
| E inner long borders | 2 strips | 38½ × 1 in |
| E inner end borders | 2 strips | 1 × 13½ in |
| D binding | 4 strips | 2½ × 42 in |
01 Prepare three separate star kits
Use non-directional cotton with 42 inches of usable width. All listed cuts include ¼-inch allowances. The nominal design span is 42 × 16 inches; the raw top is larger by its outside allowances. Use an inch ruler and read all stages before batch cutting.
For the left star, combine ten B squares, two E squares, four navy corner squares and four navy bases. The middle uses C/F and the right uses D/G. In each star, reserve two colored squares for the center and eight for point units. Keep binding and framing pieces separate.
Test two spare 1½-inch-wide strips with a ¼-inch seam; they should be 2½ inches across after pressing. Correct the seam before proceeding.
02 Sew the four-patch centers
For the blue center, make two pairs, each with one E square and one B square. Press each pair toward blue. Each pair is 6½ × 3½ inches. Arrange the upper pair pale–blue and the lower pair blue–pale, so the pale squares occupy the upper-left and lower-right corners.
Place the pairs right sides together, nest the center allowances and join. Press the joining seam open. Check a 6½-inch square. Repeat with C/F and D/G to make three centers.
03 Make all twelve point units
Each unit begins with one navy 6½ × 3½-inch base and two matching 3½-inch point-color squares. The small colored corners create the star tips; the central large triangle stays navy. Make four units in each of B, C and D.
04 Arrange the stars before joining rows
All four navy triangles point toward the four-patch center. In the top horizontal unit, the navy triangle points down; in the bottom, it points up. Rotate the left vertical unit so navy points right and the right unit so navy points left. Keep the pale center squares on their upper-left/lower-right diagonal.
Top and bottom rows each contain navy corner square + horizontal point unit + navy corner square. The middle row contains vertical point unit + four-patch center + vertical point unit.
05 Join the block rows and the runner center
Sew each row with ¼-inch seams. Press top and bottom row allowances toward navy corner squares; press the middle row allowances toward its center. Top/bottom rows should each be 12½ × 3½ inches, and the middle row 12½ × 6½ inches.
Match ends and seam intersections and join the rows, pressing the long joining seams open. Each block should be 12½ inches square. Complete all three. Arrange blue – navy spacer – turquoise – navy spacer – violet, then join and press toward the spacers. The center is 38½ × 12½ inches.
06 Add the ice-blue and navy frames in order
Pin ends and centers. Add long strips before end strips at each framing stage, and press without stretching. All frame joins are square-ended; only binding corners are mitered.
| Add these pieces | Unfinished result |
|---|---|
| Two E strips, 38½ × 1 in, top/bottom | 38½ × 13½ in |
| Two E strips, 1 × 13½ in, left/right | 39½ × 13½ in |
| Two A strips, 39½ × 2 in, top/bottom | 39½ × 16½ in |
| Two A strips, 2 × 16½ in, left/right | 42½ × 16½ in |
07 Layer, baste and quilt
Prepare backing and batting at least 22 × 48 inches, or larger if your quilting setup requires it. Keep both oversized until quilting is complete. The planned raw top is 42½ × 16½ inches.
08 Attach the binding and finish the back
Use 4 strips cut 2½ × 42 inches. This project joins the strips with diagonal seams and closes the final attachment with a tucked overlap. The estimated continuous strip length before end cleanup is 160.5 inches. Measure the actual prepared length before attaching it.
09 Final checks and small corrections
The binding is violet; there is no additional violet border. Before quilting, confirm three 6½-inch centers, twelve 6½ × 3½-inch point units and three 12½-inch blocks. A navy triangle pointing outward is an orientation error, not a size adjustment.
If a point disappears, inspect the unit’s point allowance and the next joining seam. If a frame waves, check the panel and cut lengths before sewing. Four diagonal-joined 42-inch binding strips provide about 160½ inches before cleanup, against a raw perimeter of 118 inches.
Keep these measurement checks beside you
| Stage | Raw / unfinished measurement |
|---|---|
| Four-patch center | 6½ × 6½ in |
| Star block | 12½ × 12½ in |
| Three-star center with gaps | 38½ × 12½ in |
| Inner frame complete | 39½ × 13½ in |
| Raw top | 42½ × 16½ in |
Check after pressing and cooling, without stretching. If an earlier unit is incorrect, correct it there before adding the next component.
Your project record
- Chosen fabrics, preparation method and usable widths.
- Quarter-inch seam test and first unit measurements.
- Actual backing allowance and batting quilting requirements.
- Quilting method, finished measurements and changes for a future version.
Written review: November 5, 2026. Images illustrate the design; diagrams explain placement. No physical test result is claimed.


